MSC 3 Bow 4 Bow Bimini Top Boat Cover with Rear Support Pole and Storage Boot, Color Grey, Burgundy,Navy,Beige,Pacific Blue,Black,Forest Green,White,Teal available (4 Bow 8’L x 54″H x 79″-84″W, Beige)

Made of 600D polyester canvas with double PU Coating,Marine grade
1 anti-rust and strong Aluminum Frame
Contains Two rear support pole and one storage boot
2 Year Limited Warranty
MSC 3 Bow Bimini Boat Top Cover with Rear Support Pole and Storage Boot
MSC 3 Bow Bimini Boat Top Cover with Rear Support Pole and Storage Boot Protects you and your boat from the sun and rain while adding one to your boat. It s made of 1 Anti-rust and sstrong aluminum frames,Marine-grade 600D polyester canvas with double PU coating and nylon/stainless steel fittings. The standard bimini top is partially assembled and is easily installed by one or two people in few minutes. SPECIFICATION: Size Options: A. 3 Bow 6’Length x 46″Height x 54″-60″Width B. 3 Bow 6’Length x 46″Height x 61″-66″Width C. 3 Bow 6’Length x 46″Height x 67″-72″Width D. 3 Bow 6’Length x 46″Height x 73″-78″Width E. 3 Bow 6’Length x 46″Height x 79″-84″Width F. 3 Bow 6’Length x 46″Height x 85″-90″Width Color Available : Grey, Pacific Blue, Burgundy,Navy,Beige,Forest Green,White,Black,Seal Package Contains: 1 x Marine Grade 600D Polyester Canvas canopy 1 x Anti-rust and strong aluminum frame 1 x Color Coordinated 600D Polyester Canvas made storage boot 2 x Rear Support Pole 2 x Front Adjustable Strap 1 x Assembly Instruction Manual for easy install 1 x MSC Bimini Top Fittings Box Note: MSC Standard 3 Bow Bimini Tops are NOT designed for Rigid Inflatable Boat to use.
How to select your Bimini Top
Determine which size top to order is choosing the dimensions that best accommodate your boat and your requirements. Think about the coverage area when the top is deployed or opened and also where it falls when it s closed and folded down at the rear of the boat. Make sure there is enough space in front of and behind the deployed top to mount eye straps to secure the hold-down straps or braces. Using a measuring tape to ensure the correct fit ! To find the width, determine the pivotal mounting point located on each side of the boat. The pivotal mounting point will be approximately at the center point of the top on each side of the boat. After determining where the pivotal mount location will be on each side of the boat, measure the distance between these mounting points to determine the width of top you need. To determine the desired height, measure straight up from the pivotal mounting point while standing inside the boat. This measurement should be the minimum headroom clearance desired. Note that the height of the top is not the distance from the boat floor or the length of the frame arms. Note: Bimini Top should never be open when boat speed is over 25 mph.