Heavy Duty Tiedown Anchors, Surface Mount D-Ring 6,000 lb. Capacity w/ 2-1/2″ Hardware, 8-Pack

6,000 lb. rating (straight pull). WLL is 2,000 lb. capacity*.
Hardware Kits: This listing comes with eight (8) hardware kits, enough to complete the installation. Each kit comes with 2 – 3/8″ x 2-1/2″ long carriage bolts, 2 – fender washers, and 2 – 3/8″ nylon locking nuts. (See description below for more hardware info).
The surface mount steel attachment is zinc coated to inhibit corrosion.
3/8 thick diameter ring measures 2-1/4 wide x 2-1/4 long (outside dimensions). The “top cap” is 1/8″ thick. It measures 1-1/4″ wide x 3-1/4″ long, with 1/2″ holes on 1-1/2″ center.
Second image allows you to compare, to get a feel for the size.
Product Description
This tie down attachment is plenty strong and is able to receive multiple tiedown straps simultaneously. To obtain maximum strength it is recommended to install these d-rings with the included 3/8″ carriage bolts, lock nuts, and fender washers (wide diameter). WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity. HARDWARE KITS: The 2-1/2″ bolts are long enough to go through 1-5/8″ or 5/4″ thick planks which are typical on open trailers. Important – Most enclosed trailers have 3/4″ thick floors. The 2-1/2″ long bolts will work on 3/4″ or 5/4″ floors but are longer than what is needed. Therefore if you prefer 1-3/4″ bolts please message us and we will provide the SHORTER BOLTS.