Universal TFT GPS Speedometer Adjustable Odometer with Voltmeter 9-32V for Car Motorcycle Tractor Truck 85mm (Black)

Open a 3-3/8″ dimension and 2-1/5″ depth hole, put gauge into it and fasten
Hook up easily, 2 wires connection(power and ground). This is complete unit, can work directly with 3 meters gps antenna together, not need other sensor cables. Mount the sensor at any position, on or under the dashboard.
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it.
It shows current speed, odometer(can be adjustable), trip meter, COG and voltmeter. Press the back button to adjust unit(KM/H, KNOTS and MPH)
Same backlight as picture shown. 12VDC/24VDC Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection
Product Features:
-Suitable for all vehicles, boats and off-road vehicles
-The signal comes directly from the satellite signal receiver(GPS Speed Sensor)
-The gauge has the advantages of high precision, quick location confirmation and short start up time.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (?? 1 min)).
Product Introduction
How to connect wires
Red wire — Power Positive.
Black wire — Power negative.
Please note: GPS Speedometer can be connected to 12VDC and 24VDC power directly.
Why does LCD show Err
– Turn on supply power after installation.
– Then the meter starts to search for signal and LCD will count automatically.
– If there is still no signal when LCD counts to 300. the LCD displays “Err”.
GPS Speedometer keeps counting
– After installation in the first time, GPS speedometer needs to search for signal, that’s the reason that LCD counts numbers all the time.
– After getting signal, LCD will come back to 0. It is normal.
Technical Data
Fixing dimension
85mm(3-3/8″)
Working Voltage
9-32V
Speed indicating range
0-999(km/h, mph, knots available)
Odometer indicating range
0-999999(km/h, mph, knots available)(can be reset and adjustable)
Voltmeter
9-32VDC
Protection grade
IP67
Operation mode
LCD display, stepper motor
How to install it
– Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 55mm (2 3/16??) behind the panel to fit the gauge.
– Put the gauge in the hole and screw down.
– For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
999 (MPH, Knots, Km/h adjustable)
999 (MPH, Knots, Km/h adjustable)
999 (MPH, Knots, Km/h adjustable)
999 (MPH, Knots, Km/h adjustable)
999 (MPH, Knots, Km/h adjustable)
999 (MPH, Knots, Km/h adjustable)
size
85mm
52mm
52mm
85mm
85mm
85mm
color
white+stainless steel
black+stainless steel
black+black
white+stainless steel
white+stainless steel
black+black
Indicating Range
0-999 (MPH, Knots, Km/h adjustable)
0-999 (MPH, Knots, Km/h adjustable)
0-999 (MPH, Knots, Km/h adjustable)
0-999 (MPH, Knots, Km/h adjustable)
0-999 (MPH, Knots, Km/h adjustable)
0-999 (MPH, Knots, Km/h adjustable)
Type
GPS speedometer
GPS speedometer
GPS speedometer
GPS speedometer
GPS speedometer
GPS speedometer
adjustable odometer
yes
yes
no
no
no
yes
Package Includes:
1x GPS speedometer
1x GPS Antenna
1x Multi-plug socket
1x Installation Instruction