Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc.

PERFECT SOLUTION – Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
FIT – The Bullnose Rudder is a boat rudder that fits a 1 1/8″ (1.125″) transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5″ high x 4.75″ wide and fits a 1 1/8″ shaft diameter. It’s most commonly used for “but not limited to” minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
ESSENTIAL – In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, it prevents the boat from spinning as much when the motor is off . Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
QUALITY – Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don’t have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
BOW MOUNT – Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1′ of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
The Bullnose Rudder (Patent no. US D712,341S)
The Bullnose Rudder clamps tightly to a 1 1/8″ (1.125″) diameter shaft, of a trolling motor and provide a more accurate course when fishing or boating. Whether you want a straight course or to make sharper turns, the Bullnose Rudder provides precision that the trolling motor cannot. It holds straighter courses under windy conditions, and reduces drifting off course.
Manufactured in the USA with high quality parts & materials.Measures 10.5″ by 4.75″ and is designed to fasten to a 1 1/8″ (1.125″) transom mount trolling motor shaft. Its designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off.Perfect for small watercrafts, such as kayaks, pontoons, jon boats, canoes, etc. Minn Kota and Newport Vessels trolling motors are popularly used with the Bullnose Rudder, and are among many compatible brands.

Patent no. US D712,341S

INSTALL
Only takes a few minutes to install and you are ready to go. If the shaft is slimmer than 1 1/8″ (1.125″) no worries, there is double sided mounting tape provided in the packaging to shim a thin shaft.

PERFORMANCE
It was designed to fit a transom trolling motor. It has a unique shape to accommodate your prop. If there is not enough clearance between the shaft and the prop, simply flip it upside down. It will perform just the same while allowing the prop to spin freely without any interference.

BENEFIT
Trolling motors are known for a lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Most tiny boats will benefit from having some kind of rudder set up in the back vs not having a rudder at all. Common boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.

BOW MOUNT
Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount.

Quality Control
Where is the Bullnose Rudder made
Manufacturing, assembling and packaging is done in the USA providing jobs to the local community. The Bullnose Rudder was invented and patented by the founders of Bullnose Products here in the
USA. (Patent no. US D712,341S)

Who can I reach out to if I have questions or concerns
If you have any concerns please reach out to Bullnose Products “directly”. We strive to provide the best service for our customers, but it can be a challenge if we are third in line to the communication process. Please don’t hesitate to reach out directly through Amazon messaging.

Quality, Quality, Quality!!
The Bullnose Rudder is the “original”, first of its kind, invented by the founders. From day one Bullnose Products strives for Quality!!! The Bullnose Rudder design is hands down the most durable trolling motor rudder on the market. Not only is it very well constructed but it is made from a thick nylon material to withstand any knocking around during transportation while on the boat.

Frequently Asked Questions
Will it fit my trolling motor
It is made for a 1 1/8″ (1.125″) diameter shaft. The clamps are not adjustable. However, if the shaft is slimmer, no worries. There is double sided foam tape provided in the packaging to shim a thin shaft.
Will this fit a shaft larger than 1 1/8″ (1.125″)
No. The clamps are not adjustable.
Why do I need a rudder on my trolling motor
Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all.
Can you use it in saltwater
The plastic is durable and will withstand salty waters, but, like most metal, the hardware may be prone to rust without proper care.
Does the rudder collect excess weeds and grass
The rudder itself does not tend to collect excess plants or weeds.