S-Union RV Toilet Rubber Bowl Leak Seal Kit Replacement for Dometic 385311462 and 385316140, fit for Dometic/Sealand /Mansfield/VacuFlush and Travel Trailer RV Camper Toilet

Compatible Brands: This Rubber Bowl Leak Seal Kit fits most pedal-flush Dometic, SeaLand, VacuFlush and Traveler brand toilets that do not include overflow holes inside the toilet bowl, for recreation veihcle and toilets. Replacement for Dometic 385311462 and 385316140.
Notice: Does not replace bowl seal on 300, 310 320 series Dometic toilets.
High Quality Material: It made of high quality rubber to ensure high performance, soft, durable, anti-Friction, good tightness to ensure seal properly, no worry about leaking.
Features: Did you suffer for years with RV toilet not holding water
Not to worry, this rubber bowl seal kit is easy to replace and it keeps the water in place and the stink out, Save money on a new toilet.
What you get : Bowl Seal Kit contains 1 x rubber flush ball seal and 1 x rubber bowl seal , for any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Product Description
Compatibles Models:506+, 511H, 547+, 548+, 706, 709, 748, 749, 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049, EcoVac 146-149VacuFlush 168, VacuFlush 606, VacuFlush 647, VacuFlush 648, VacuFlush 1006, VacuFlush 1008, VacuFlush 1047, VacuFlush 1048, Vacuflush 1049, VacuFlush 1106, VacuFlush 5146, VauFlush 5148, VacuFlush 5149An easy way to know this seal will fit your toilet: Face your toilet – if the pedal is on the left of the toilet, it will fit!Note: When installing make sure to note “this side up” on the thinner ball seal.Installation instructions: 1)Turn off water supply. 2) Hold the flush ball open by depressing the flush pedal. 3) Grasp the underside of the old seal and pull towards you to remove. 4) Clean the rim and bowl area where the old gasket previously sat. 5) Release flush pedal and allow the flush ball to close. 6) Clean the flush ball. 7) With the flush ball closed, put the new seal in and press outwards to ensure that it is firmly in place. 8) Reopen the flush ball and spread a lubricant in the areas where the gasket will contact the flush ball. 9) Open and close the flush ball several times, then press down on the gasket to ensure it is properly positioned. 10) Turn on the water supply, add water to the bowl and ensure that there are no leaks.